Services Technology

Linksys WRT1900ACS Wireless Router Review


I know nearly all of you are familiar with the Linksys WRT54G, a router that starred in 2002 and ended up being one of the first dependable devices of its type, it absolutely was user friendly, affordable and most crucial, the program had been source that is open.
So, you might install DD-WRT, for example, and use the router as a business router, rather than actually buying a costly one.
Note: The OpenWRT and DD-WRT had been initially developed for the WRT54G to incorporate more functionality, ergo the WRT syntagm, but, we already know that open-source softwares can be used on most routers nowadays.

On the basis of the appeal, the Linksys circulated still another router, something of a successor to your WRT54G, the linksys wrt1900ac best buy. This router promised to provide high rate, great protection and overall, a high-quality, premium experience, but all of these didn’t come at a price tag that is cheap.


Note: Earlier in 2015, Linksys released an additional version of WRT1900AC that lacked the fan, had better overall hardware, but the external design remained the same.
Not long immediately after, Linksys released the next form of the router called WRT1900ACS which, once again, had an improved CPU clock speed, while keeping equivalent, (now iconic) exterior design. But, Linksys circulated both the WRT1900AC V2 and WRT1900ACS beneath the exact same FCC ID, so, it had to produce another variation, called WRT1900ACS V2 to make up for that error (there are not any changes to your internal hardware from the previous variation).
So, in this review i shall use the second version of the WRT1900ACS.

IMPROVE 05.20.2019 A couple of days ago, it was disclosed that an important wide range of Linksys routers are at risk of an info disclosure exploit so, due to the fact Linksys WRT1900ACS is part of affected routers and Linksys hasn’t yet released any area to correct the problem, the way that is only be sure you’re protected is to install a custom firmware, such as OpenWRT. For this reason, I compiled this guide which should allow you to install OpenWRT (task LEDE) on a Linksys router through the WRT series.

The look for the Linksys WRT1900ACS is in no real way subtle. It features a solid, blue and black plastic case (just like the WRT54G), with four removable, upgradeable antennas, that are very sturdy and with thick rubber feet, which should ensure a stability that is proper.
This design is supposed to bring nostalgia and it manages this feat very well. It’s true although it doesn’t have an ominous look, like some ASUS routers, it has a beetle-like appearance) that it doesn’t really look premium, but it certainly has its appeal (.

Initial version of WRT1900AC had an interesting addition, a built-in fan that acted out as a fail-safe in case of overheating, but the second and the final ACS version is stripped of this feature, adopting the common passive cooling, so the router is also a lot quieter. Unless Linksys would have decided to clock the CPU to 2.0GHz or more (which could overheat the device), there was no reason that is real have an inside fan from the beginning.
The WRT1900ACS is fairly hefty and a bit chunky, measuring 9.7×7.6×2.0 ins and weighing 2.1 pounds and thanks to the no-subtle design approach you might have a hard time blending it using the furniture (unless you prefer it to be an eye-catcher). The WRT1900ACS can be wall-mounted (VESA-compatible) if space is of paramount importance.
On front side associated with router there is certainly the array that is usual of for connection status: energy, Internet, 2.4GHz, 5Ghz, eSATA, USB and Ethernet connections and the WPS.


In the straight back, you can find the WPS switch, four Gigabit LAN ports, one Gigabit WAN port, USB 3.0 slot, USB 2.0/eSATA port (mostly of the routers to have an eSATA port), RESET button, power socket and the ON/OFF button. We have seen that a lot of routers which may have a USB 3.0 slot, prefer to put it on front, nonetheless it seems that the Linksys made a decision to stick it on the back. This really is a decision that is great having it in the front can result in chaos of cables.
Design-wise, the Linksys WRT1900ACS is exactly exactly what everyone else (geek or not) has expected through the WRT54G successor. It might not be to everyone’s style, but, personally, I liked it.

In terms of hardware, the WRT1900ACS is a 3×3 three stream router and it features a dual-core 1.6GHz Marvell Armada 385 88F6820 CPU. This is a increase that is great energy through the older specs of version 1 (1.2GHz dual-core ARM processor). The CPU is backed by 512MB RAM from SK hynix (an upgrade from 256MB DDR3 RAM) as well as the same 128MB flash storage (Spansion S34ML01G100TFI00).
The router is effective at delivering speeds all the way to 1300Mbps on 5GHz and 600Mbps on 2.4GHz band. It is possible to connect a USB HDD in order to make your NAS that is own Attached Storage).


Performance and Connectivity
The router remains 3×3, three stream router although it has 4 antennas. It uses both explicit and implicit beamforming in order to focus its signal on clients and determines which of the four antennas delivers the best performance and dynamically switches involving the four.
Because of the handy antennas and the beamforming, the router should have a great, optimized wireless performance. So let’s put it to a test.
So that you can test the genuine energy associated with Linksys WRT1900ACS, we have paired it because of the model that is same bridge mode and also the email address details are quite good.
At close range (around 10 feet), on 802.11ac and 5GHz, the router scored 541 Mbps and at around 100 feet, we recorded about 355 Mbps. Using the band that is 2.4GHzand the 802.11n), the Linksys scored 166 Mbps at 10 foot and 64 at 100 legs. Comparing towards the WRT1900AC version 2, the ACS has a much better 5Ghz performance, but reduced 2.4Ghz speeds at close range.


Note: The WRT1900ACS has a really great range, reaching nearly 300 foot in the band that is 2.4GHz.
Whenever along with a portable device through USB 3.0, we registered 87 MBps for writing a single 10GB file and around 111 MBps for reading it. This makes the WRT1900ACS one of the router that is fastest using this feature, faster than some committed NAS servers.
Overall, the answers are fantastic, the sign is stable and strong while the range is very large. Its really near the ASUS RT-AC87U in terms of performance.


Crucial Note: The Linksys WRT1900ACS V1 Firmware just isn’t compatible with the Firmware utilized on the WRT1900ACS V2.

Starting the router is quite hassle free and in about five minutes you will have the router running. The interface is user friendly and restarting it takes little to no time (while other routers need a short while).
But there are a few upsides and downsides. Linksys has introduced the Linksys Smart WiFi account, that although it isn’t necessary in order to operate the router, it can help you access the router from anywhere through the Linksys website.
Additionally, it is quite low on features. The fundamental router firmware is not really feature-rich also it seems that the Linksys business has left this towards the DD-WRT community (although making the WRT1900ACS, DD-WRT compatibile is a good thing).


Nevertheless, you’ll fiddle using the system Map, which shows you every device connected to the router and also the devices that are having difficulty accessing the network. It offers a DLNA media host, OpenVPN has become supported (the version that is previous not) and you also additionally get ftp and smb servers.
The Guest reports are punished too. You are able to just select a single password for both N and AC bands and users will have to enter that password in a web browser whenever they begin a fresh connection, which can be tedious and annoying.
Parental settings is present and it permits blocking called network clients, but it is nevertheless low on features. So fundamentally, everything, such as the QoS has been nicely toned down and kept at a basic level.
You can keep consitently the Linksys that is original WRT1900ACS, but in order to actually enjoy this router, I completely recommend an Open supply firmware, like OpenWRT, DD-WRT or Tomato.

My last verdict is that the router does deliver a premium experience, has fast speed and coverage and it is less expensive than before (the price did come a lot down over the last year). The Linksys WRT1900ACS is more generic, considering the competition (ASUS RT-AC68U, NETGEAR Nighthawk R7000) and although a worthy successor, it should be taken as a stand-alone if the Linksys WRT54G made history in the router world.